best selling
-
1 X 1.5mm High Performance Flexible Appliance / Marine Wire – Green/Yellow
Applications:
Power
Flexible thermal insulated wire suitable for switchboard wiring, motors and transformers.
Marine
Tinned copper conductors for boat wiring and other marine applications.
Audio
Amplifiers and audio equipment where oxygen-free copper wire is required.It features:
Tinned fine stranded copper conductor
UV stabilised
Flame retardant
Oil and chemical resistant (refer to Chemical Rating Chart)
No. of Cores x Size (mm): 1 x 1.5
Approx Stranding (No. of wires x mm): 30/0.25
Approx. Overall Diameter (mm): 3.4 -
SURFACE MOUNT FRAME FOR PANEL LIGHT 600*600*50
HIGH QUALITY SURFACE MOUNT FRME FOR PANEL LIGHTS
SUITS 600*600mm PANEL LIGHTS. -
TANZINI TCG Series RCD 2Pole 40A
Rated Current: 40A
Rated Voltage: 230Vac 50Hz
Pole: 1P+N
In=30mA
Ic=Inc=6kAWidth:36mm
Height: 84mm
Depth: 69mmComply with AS/NZS 61008
-
LEGRAND ISOLATING SWITCH 1P 63A
Isolating switches DX3-IS – from 16 A to 125 A
Double break contactsfor more product information, please click https://www.legrand.co.nz
Product characteristics
Isolating switches – Grey handle
AC 22 A
Can be equipped with 1 DX3 signalling auxiliary
1P – 250 V~
Compatible with prong-type and fork type supply busbars
Nominal rating In : 63 A
Number of modules : 1 -
PRYSMIAN 1MM 2C+E TPS FLAT
Two core plus earth flat cable with 450/750V V-90 insulation.
PVC sheathed complies with AS/NZS 5000.2 standards which was manufactured in accordance with PVC best practice guidelines.
Includes 90°C copper conductors.
It is suitable for fixed wiring installation for power circuits in domestic, commercial and industrial situations.Conductor material: Copper
Outer sheath: PVC
Insulation: PVC
Cores x Area (mm2): 2 x 1.0 + 1.0 E
Rated Voltage Uo/U: 450/750 V
Max. conductor temperature in service: 75°C
Earth selection cross: 1.0 mm²
Nom Diameter: 4.0 x 8.6 mmSubject to stock available.
-
TANZINI SINGLE ISOLATING SWITCH 2P 20A IP66
TANZINI IP66 Isolating switch rates at 20A, and meets AS/NZS standards. Good for isolating air condintioner, hot water cylinder, and other applicances.
-
SDocs:V0721-ISO1P20
Voltage: 250V
IP66
Current: 20A
Dimension:85x85x70 mm -
-
4MM 2Core GARDEN CABLE
2 Core Parallel Webbed (Figure 8) 127/.2 (4.0mmsq). P.A.C.W.
FLEXIBLE U.V resistant P.V.C insulated.
Low Voltage Cable. Not for mains connection.Conductor: 127 strands of 0.2mm Plain Annealed Copper to AS/NZS1125 drawn from Class 110A copper to AS/NZS1574.
Max. D.C. resistance at 20C: 4.63 ohms / km.Insulation: Coloured U.V Resistant P.V.C.
Parallel Webbed (Figure 8 configuration).
Nominal Diameter: 4.70 x 9.5 mm.
Nominal Wall Thickness: 1.0 mm. -
Aluminium Metal Cover for HEM/HQE OneGang Switch
Aluminium cover applicable for HEM and HQE one gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
TANZINI MCB 1Pole 10A Type-C TCG Series
Rated Current: 10A
Rated Voltage: 230/400Vac 50Hz
Pole: 1P
Type C
Ic=Inc=6kAComply with AS/NZS 60898
-
BARDIC 2.4W LED Recessed Emergency IP20 AS/NZS 2293
An LED recessed non-maintained emergency luminaire designed to provide discrete and outstanding emergency illumination with long life LED and low standby power consumption.
-LiFePO4 (Lithium Iron Phosphate) battery including integrated battery management system (BMS) to maximise battery life.
-Superior photometric classification (D63).
-Supplied with two optical lens options to suit Open Areas (330 Lm) and Corridors (276 Lm).
-Versatile 2-piece disc with both large (144mm) and small disc (95mm)
-Designed and manufactured in accordance to AS/NZS 2293Technical Data
Input Operating Voltage: 230V 50HzOutput
LED Array: Single LED
Light Source: 2.4W
Lifetime: 50,000 hour LEDs
Function: Non-Maintained
Lumen Output (Emergency Mode): 330lm (Open Area)Battery
Type: LiFePO4
Protection: Overcharge and low voltage disconnect
Emergency Runtime: 3 hours*Physical
IP Classification: IP20
Weight: 0.7kg
Dimensions – Lamp Disc (OxH): Outer disc: 145x28mm / Inner disc: 95x28mm
Construction: Disc: Flame Retardant PC
Control Box: Flame Retardant PCInstallation
Mounting: RecessedEnvironment
Temperature: 0 – 40 degC
Relative Humidity: 0 – 95%Conformance
C0: D63
C90: D63
Standards: AS2293, CISPR15, AS60598Intelligence
Sentinel: No
WiNetRF: NoWarranty
Duration: Fitting: 3 Years / Battery: 2 Year*Guaranteed to meet runtime requirements of AS/NZ 2293 throughout warranty duration.
-
Cat6 UTP Blue Patch Lead
The Cat6 UTP patch leads conform to the TIA/
EIA-568-B specifi cation. Patch leads are wired
to the T568A pinout specifi cation. They are
individually channel tested and are made with tangle free slimline injection molded boots.Features:
• Produced by an ISO9001 and ISO14001
certifi ed manufacturer
• 100% tested and channel certified by 3P, UL and ETL
Colour: Blue
Length: 0.3m
Frequency: 550MHz -
REEM PAR-38 Sensor Black Double Spotlight – No bulb
These outdoor spotlights mounted to wall or ceiling create a safe and secure home atmosphere while creating a stylish look.
The spotlight detects human motion including turning off when a person leaves to provide energy efficiency . An adjustable head with a 180 ° detection angle allowing easy rotation and flexibility to cover outdoor areas that need lighting.
IP44 rating provides environmental protection from water and dust day and night.Power Source: AC220-240V 50/60HZ
Detection Angle: 180°
Detection Range: 12m
Time on Adjustment: 5 secs – 8 min
Fitting Colour: Black
Ambient light: 2-1000Lux
Resistive load: 300W (max)
working temperature: -20 °c to +40 °c -
Reem Budget 12W 850lm, IP20, 4K
REEM Budget series Ceiling / Wall LED circular lamp.
Ideal for Bathroom, Bedroom, Dining, Kitchen, Living Room.
Commercial for cloak rooms, kitchens, hallways, service areas etc.Voltage: 230V, 50/60Hz
Colour: 4000K
Dimension: 250*35mm
Lumen: 850lm
IP20
Power: 12W -
TANZINI SURFACE MOUNT 4 WAY SWITCH BOARDIP65
Tanzini switchboards comply with AS/NZS standard and waterproof.
This surface mount switchboard is applicable with a range of our circuit breakers and including RCD bars , earth bar , neutral bar and busbar.Plenty of different sizes distribution board are available.
-
SDocs:V0421-SWBX
Mounting method: Surface
Dimention: 140x210x100mm
IP rating: IP65
Main earth bar: 1
Main neutral bar: 1
Bus bar: 1 -
-
BARDIC 2.3W All-in-one LED Exit 24M AS/NZS2293 Emergency
An aesthetically pleasing all-in-one maintained exit, designed for low maintenance and low power consumption. The Lithium Iron Phosphate (LiFePO4) battery technology provides a sustainable energy source with excellent thermal stability, faster charge times, high energy density and provides constant power delivery.
-Lithium Iron Phosphate battery including integrated battery management system (BMS) to maximize battery life
-24m Viewing distance, Maintained mode of operation
-Quick & Easy Slide Connect Installation
-Complete with all variations of the “Running Man” decal pack
-Designed and manufactured in accordance to AS/NZS 2293Technical Data:
Input Operating Voltage: 230V 50HzOutput:
Light Source: 2.3W
Lifetime: 50,000 hour LEDs
Function: MaintainedBattery:
Type: LiFePO4
Protection: Overcharge and low voltage disconnect
Emergency Runtime: 2 hours*Physical:
IP Classification: IP20
Weight: 1.0kg
Dimensions (LxWxH): 325 x 204 x 79 mmConstruction: Body: Polycarbonate / Diffuser: Polyethylene
Viewing Distance: 24mEnvironment:
Temperature: 0 – 45 deg C
Relative Humidity: 0 – 95%Conformance:
C0: D5.0
C90: D5.0
Standards: AS2293, CISPR15, AS60598Warranty:
Duration: Fitting: 3 Years / Battery: 2 Year*Guaranteed to meet runtime requirements of AS/NZ 2293 throughout warranty duration.
Accessory:
EGRLPG2-RM Rod Mount Kit
EGRLPG2-CS Chain Suspension Kit
EGRLPG2-WS Wall Side Mount Kit -
HEM BLACK Single Switch IP56 16A
IP56 rating provides high weather resistance for water and dust making this product suitable for outdoors.
Power: 16A
Input Voltage : AC 250VSize:85x85x62mm
-
![3 Pin Plug to Bare End [1M]](https://mew.co.nz/wp-content/uploads/2025/06/eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoidmVzdGFcL2ltYWdlc1wvcHJvZGltZ1wvMjY5MV8xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6NDgwLCJoZWlnaHQiOjQ4MCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0-300x300.webp)
3 Pin Plug to Bare End [1M]
High quality SAA Approved 3 pin plug to bare end, 3 core 1mm cable, 10A rated. Ideal for engineers,technicians and DIY use.
Cable Size: 1mm
Color: Black
Current rate: 10A
Length: 1M -
Reem Budget 12W 850lm, IP20, 6K
REEM Budget series Ceiling / Wall LED circular lamp.
Ideal for Bathroom, Bedroom, Dining, Kitchen, Living Room.
Commercial for cloak rooms, kitchens, hallways, service areas etc.Voltage: 230V 50/60Hz
Colour: 6000K
Dimension: 250*35mm
Lumen: 850lm
IP20
Power: 12W
-
1 X 1.5mm High Performance Flexible Appliance / Marine Wire – Green/Yellow
Applications:
Power
Flexible thermal insulated wire suitable for switchboard wiring, motors and transformers.
Marine
Tinned copper conductors for boat wiring and other marine applications.
Audio
Amplifiers and audio equipment where oxygen-free copper wire is required.It features:
Tinned fine stranded copper conductor
UV stabilised
Flame retardant
Oil and chemical resistant (refer to Chemical Rating Chart)
No. of Cores x Size (mm): 1 x 1.5
Approx Stranding (No. of wires x mm): 30/0.25
Approx. Overall Diameter (mm): 3.4 -
1.0MM TWIN SPEAKER CABLE – 50M/DRUM
High quality 2 core 1.0mm speaker cable. Ideal for home or mobile audio systems. The red stripe makes it easy for polarity identification.
Conductor Material: Bare Copper
Conductor Size: 17AWG / 1.0mm
Structure(mm): 2C x 32/0.20
Insulation material: Polyvinyl Chloride
Approx. Dia(mm):3.0×6.0
Pack: 50M -
16MM SINGLE CORE XLPE CABLE
For mains, sub-mains and sub circuits unenclosed, enclosed in conduit, buried direct or in underground ducts for buildings and industrial plants where not subject to mechanical stress. Suitable where space is at a premium and/or where conditions of overload may occur.
Conductor: Plain annealed copper
Insulation: XLPE X-90
Sheath: PVC 5V-90
Voltage: 0.6/1KV
Standards: AS/NZS 1125, AS/NZS3808 and AS/NZS 5000.1
Voltage: 90°C -
2 x 4mm2 Solar Cable DC 1.5kV EN5061/IEC62930 100METER
2 X 52/.3 (4mmsq). Tinned Copper Wire, XLPO Insulated & XLPO.
Sheathed in Twin format.
Certified to EN50618/IEC62930. TUV
1.5kV dc -40c to 120c.Construction
Conductor: 52 strands of 0.3mm nom. TINNED Annealed Copper to AS/NZS 1125 Class 5.
Max. D.C. resistance at 20C: 5.09 ohms / km.Insulation: XLPO.
Nominal Wall Thickness: 0.60 mm.Core Colours:
1. Black
2. RedSheath: Black with red polarity stripe on side of red core.
XLPO Single Double Insulated (TWIN) configuration.
Nominal Dimensions: 5.5 x 11.4 mm
Nominal Wall Thickness: 0.6 mmIdentification: Printed on sheath in contrasting colour ¨C HFXT2520- XLPO insulated TUV 2pfG 1169 2 x 4MM2 0.9/1.5kV DC UV STABLE DC USE ONLY ¨C DO NOT DISCONNECT UNDER LOAD ¨C 001M >I<
-
200W HIGH BAY 6500K IP65 160lm/W IK08 Reem
Power: 200W
Input voltage: AC220-240Vac 50Hz
CCT: 6500K
IP rating: IP65
Size: dia330x122mm
Lumen: 160lm/w ±10%
CRI(Ra): >80
Beam angles(°): 90°
PF>0.9
IK08
Working Temperature: -15°c – 35°c
Comes with 1.5meter wire and 3pin plug
3 Year Warranty -
3 Pin Plug to Bare End [1M]
High quality SAA Approved 3 pin plug to bare end, 3 core 1mm cable, 10A rated. Ideal for engineers,technicians and DIY use.
Cable Size: 1mm
Color: Black
Current rate: 10A
Length: 1M -
4MM 2Core GARDEN CABLE
2 Core Parallel Webbed (Figure 8) 127/.2 (4.0mmsq). P.A.C.W.
FLEXIBLE U.V resistant P.V.C insulated.
Low Voltage Cable. Not for mains connection.Conductor: 127 strands of 0.2mm Plain Annealed Copper to AS/NZS1125 drawn from Class 110A copper to AS/NZS1574.
Max. D.C. resistance at 20C: 4.63 ohms / km.Insulation: Coloured U.V Resistant P.V.C.
Parallel Webbed (Figure 8 configuration).
Nominal Diameter: 4.70 x 9.5 mm.
Nominal Wall Thickness: 1.0 mm. -
4MM CONDUIT WIRE – GREEN/YELLOW
Single core conduit wire with 0.6/1KV V-90 insulation.
PVC sheathed complies with AS/NZS 5000.2 standards which was manufactured in accordance with PVC best practice guidelines.
It is suitable for fixed wiring installation for power circuits in domestic, commercial and industrial situations.Conductor material: Copper
Outer sheath: PVC
Insulation: PVC
Cores x Area (mm2): 1 x 4.0
Rated Voltage Uo/U: 0.6/1 KV
Max. conductor temperature in service: 75°C
Nom Diameter: 4.7 mm
Color: Green/yellow -
56Series L1 MODULE ENCLOSURE COVER IP66
Width 95 mm
Height 95 mm
Depth 28 mm -
95MM 1 CORE ALUMINIUM CABLE
This cable may be buried directly in the ground, or may be installed in ducts buried in the ground. Used for Indoors, cable ducts, outdoors and buried in the ground, for power stations, industry and switchgear as well as for urban supply networks, if mechanical damage is unlikely. XLPE insulation material has better mechanical, electrical, chemical and durability characteristics than PVC.
Conformance: AS/NZS 5000.1
Core colour: Natural
Number of Core: 1
Conductor: Al 1350 AS/NZS 2848.1
Conductor Size: 95mm
Insulation: XLPE X-90 AS/NZS 3808
Sheath: PVC 5V-90 Black AS/NZS 3808
Test voltage: 3.5kV/5min
Temperature range: -40 to 90C -
Aluminium Metal Cover for HEM/HQE OneGang Switch
Aluminium cover applicable for HEM and HQE one gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
Aluminium Metal Cover for HEM/HQE TwoGang Switch
Aluminium cover applicable for HEM and HQE Two gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
BARDIC 2.3W All-in-one LED Exit 24M AS/NZS2293 Emergency
An aesthetically pleasing all-in-one maintained exit, designed for low maintenance and low power consumption. The Lithium Iron Phosphate (LiFePO4) battery technology provides a sustainable energy source with excellent thermal stability, faster charge times, high energy density and provides constant power delivery.
-Lithium Iron Phosphate battery including integrated battery management system (BMS) to maximize battery life
-24m Viewing distance, Maintained mode of operation
-Quick & Easy Slide Connect Installation
-Complete with all variations of the “Running Man” decal pack
-Designed and manufactured in accordance to AS/NZS 2293Technical Data:
Input Operating Voltage: 230V 50HzOutput:
Light Source: 2.3W
Lifetime: 50,000 hour LEDs
Function: MaintainedBattery:
Type: LiFePO4
Protection: Overcharge and low voltage disconnect
Emergency Runtime: 2 hours*Physical:
IP Classification: IP20
Weight: 1.0kg
Dimensions (LxWxH): 325 x 204 x 79 mmConstruction: Body: Polycarbonate / Diffuser: Polyethylene
Viewing Distance: 24mEnvironment:
Temperature: 0 – 45 deg C
Relative Humidity: 0 – 95%Conformance:
C0: D5.0
C90: D5.0
Standards: AS2293, CISPR15, AS60598Warranty:
Duration: Fitting: 3 Years / Battery: 2 Year*Guaranteed to meet runtime requirements of AS/NZ 2293 throughout warranty duration.
Accessory:
EGRLPG2-RM Rod Mount Kit
EGRLPG2-CS Chain Suspension Kit
EGRLPG2-WS Wall Side Mount Kit -
BARDIC 2.4W LED Recessed Emergency IP20 AS/NZS 2293
An LED recessed non-maintained emergency luminaire designed to provide discrete and outstanding emergency illumination with long life LED and low standby power consumption.
-LiFePO4 (Lithium Iron Phosphate) battery including integrated battery management system (BMS) to maximise battery life.
-Superior photometric classification (D63).
-Supplied with two optical lens options to suit Open Areas (330 Lm) and Corridors (276 Lm).
-Versatile 2-piece disc with both large (144mm) and small disc (95mm)
-Designed and manufactured in accordance to AS/NZS 2293Technical Data
Input Operating Voltage: 230V 50HzOutput
LED Array: Single LED
Light Source: 2.4W
Lifetime: 50,000 hour LEDs
Function: Non-Maintained
Lumen Output (Emergency Mode): 330lm (Open Area)Battery
Type: LiFePO4
Protection: Overcharge and low voltage disconnect
Emergency Runtime: 3 hours*Physical
IP Classification: IP20
Weight: 0.7kg
Dimensions – Lamp Disc (OxH): Outer disc: 145x28mm / Inner disc: 95x28mm
Construction: Disc: Flame Retardant PC
Control Box: Flame Retardant PCInstallation
Mounting: RecessedEnvironment
Temperature: 0 – 40 degC
Relative Humidity: 0 – 95%Conformance
C0: D63
C90: D63
Standards: AS2293, CISPR15, AS60598Intelligence
Sentinel: No
WiNetRF: NoWarranty
Duration: Fitting: 3 Years / Battery: 2 Year*Guaranteed to meet runtime requirements of AS/NZ 2293 throughout warranty duration.
-
BulkHead LED10W IP65 CCT 3/4/6.5K
Voltage: 220-240Vac 50/60Hz
Power: 10Watt
Lumen: 1000lm
IP: IP65
IK: IK08
CCT:3000/4000/65000K
Beam Angle: 120 degree
Non-dimmableWhite colour trim is available.
-
-
Cat6 UTP Blue Patch Lead
The Cat6 UTP patch leads conform to the TIA/
EIA-568-B specifi cation. Patch leads are wired
to the T568A pinout specifi cation. They are
individually channel tested and are made with tangle free slimline injection molded boots.Features:
• Produced by an ISO9001 and ISO14001
certifi ed manufacturer
• 100% tested and channel certified by 3P, UL and ETL
Colour: Blue
Length: 0.3m
Frequency: 550MHz -
CHINT AC Contactor 2 x N/O 2Pole 20A
Din Mount 2P 20 amp Contactor 240V 2 x N/O
-
CHINT AC Contactor 4 x N/O 4Pole 25A
Din Mount 4P 25 amp Contactor 240V 4 x N/O
-
COPPER LINKS 16MM 63A-2 HOLE
Good quality copper linke which comply with AS/NZS standards.
Dimention: 45x18mm -
Cover for RM17ST Step Light Black Circular- Circular
COVER ONLY for RM17ST Step Light.
-
Cover for RM17ST Step Light White Square-Square
COVER ONLY for RM17ST Step Light.
-
Digital Check Meter- 40A 36mm-width Single phase
Single phase 36mm-width Digital power check meter.
Reliable method for checking how much power is being consumed.
Complies with IEC62053-21 standard AND IP51 rated for protection against penetration of dust and water.Width: 36mm
Input voltage: 220-250AC
Rated current: 40A
Dinrail mounting -
Dinrail 24/7 Timer Switch – 1 pole 16A
Programmable analogue timer with the option to customise the settings.
Easy to control once installed with a 24 hour cycle and a low power consumption.
High current rating making this timer suitable for commercial use with a 15 minute minimum interval and 3 day reserve if power cuts off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
Dinrail 24/7 Timer Switch – 16A 36mm-width
Weekly programmable digital timer with dinrail installation and advanced one week prior pre-setting.
Easy to control once installed with a 24 hour cycle and LCD display.
High current rating making this timer suitable for commercial use with a lithium battery reserve of 3 years when power is cut off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
DYNMAICS ALARM CABLE 100M, 4C, 022MM, BARE COPPER
Dynamix C-S4C100-22 100M 4C 0.22mm Bare Copper Security Cable. Supplied on Plastic Reel
0.22MM
4 CORE
100 MTR / DRUM -
EMERGENCY LIGHTING CONTROLLER 230V
ENYA series
Timer for automatic test of emergency lights
Integrated test key
1 change over contact
Width 17.5mm
Installation designTechnical dataWs Single shot leading edge with control contact
Time ranges
Time range reversible between
10min, 30min, 60min, 90min, 2h and 3h
IP rating IP20
Tightening torque: max. 1Nm
Terminal capacity:
1 x 0.5 to 2.5mm² with/without multicore cable end
1 x 4mm² without multicore cable end
2 x 0.5 to 1.5mm² with/without multicore cable end
2 x 2.5mm² flexible without multicore cable end
5. Input circuit
Supply voltage: 230V AC
Terminals: L-N
Tolerance: -15% to +10%
Rated frequency: 48 to 63Hz
Rated consumption: 2VA (1.0W)
Duty cycle: 100%
Reset time: 500ms
Ripple and noise at DC: –
Drop out voltage: >30% of supply voltage
Overvoltage category: III (in accordance with IEC 60664-1)
Rated surge voltage: 4kV -
![HDMI 10Gbs Slimline High Speed Cable with Ethernet [0.5M]](https://mew.co.nz/wp-content/uploads/2025/06/eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoidmVzdGFcL2ltYWdlc1wvcHJvZGltZ1wvMjgyM18xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6MzIwLCJoZWlnaHQiOjMyMCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0-300x290.webp)
HDMI 10Gbs Slimline High Speed Cable with Ethernet [0.5M]
High quality slimline high speed HDMI cable to support continuing market requirements for video and audio system.
2160p 4K2K @24/30Hz
8 audio channels
8bit colour depth
Supports CEC, 3D, ARC, Ethernet
Length: 0.5m
Colour: Black
