best selling
-
TANZINI SINGLE ISOLATING SWITCH 2P 20A IP66
TANZINI IP66 Isolating switch rates at 20A, and meets AS/NZS standards. Good for isolating air condintioner, hot water cylinder, and other applicances.
-
SDocs:V0721-ISO1P20
Voltage: 250V
IP66
Current: 20A
Dimension:85x85x70 mm -
-
56Series L1 MODULE ENCLOSURE COVER IP66
Width 95 mm
Height 95 mm
Depth 28 mm -
-
![3 Pin Plug to Bare End [1M]](https://mew.co.nz/wp-content/uploads/2025/06/eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoidmVzdGFcL2ltYWdlc1wvcHJvZGltZ1wvMjY5MV8xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6NDgwLCJoZWlnaHQiOjQ4MCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0-300x300.webp)
3 Pin Plug to Bare End [1M]
High quality SAA Approved 3 pin plug to bare end, 3 core 1mm cable, 10A rated. Ideal for engineers,technicians and DIY use.
Cable Size: 1mm
Color: Black
Current rate: 10A
Length: 1M -
4MM 2Core GARDEN CABLE
2 Core Parallel Webbed (Figure 8) 127/.2 (4.0mmsq). P.A.C.W.
FLEXIBLE U.V resistant P.V.C insulated.
Low Voltage Cable. Not for mains connection.Conductor: 127 strands of 0.2mm Plain Annealed Copper to AS/NZS1125 drawn from Class 110A copper to AS/NZS1574.
Max. D.C. resistance at 20C: 4.63 ohms / km.Insulation: Coloured U.V Resistant P.V.C.
Parallel Webbed (Figure 8 configuration).
Nominal Diameter: 4.70 x 9.5 mm.
Nominal Wall Thickness: 1.0 mm. -
1.0MM TWIN SPEAKER CABLE – 50M/DRUM
High quality 2 core 1.0mm speaker cable. Ideal for home or mobile audio systems. The red stripe makes it easy for polarity identification.
Conductor Material: Bare Copper
Conductor Size: 17AWG / 1.0mm
Structure(mm): 2C x 32/0.20
Insulation material: Polyvinyl Chloride
Approx. Dia(mm):3.0×6.0
Pack: 50M -
![HDMI 10Gbs Slimline High Speed Cable with Ethernet [0.5M]](https://mew.co.nz/wp-content/uploads/2025/06/eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoidmVzdGFcL2ltYWdlc1wvcHJvZGltZ1wvMjgyM18xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6MzIwLCJoZWlnaHQiOjMyMCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0-300x290.webp)
HDMI 10Gbs Slimline High Speed Cable with Ethernet [0.5M]
High quality slimline high speed HDMI cable to support continuing market requirements for video and audio system.
2160p 4K2K @24/30Hz
8 audio channels
8bit colour depth
Supports CEC, 3D, ARC, Ethernet
Length: 0.5m
Colour: Black -
Cat6 UTP Blue Patch Lead
The Cat6 UTP patch leads conform to the TIA/
EIA-568-B specifi cation. Patch leads are wired
to the T568A pinout specifi cation. They are
individually channel tested and are made with tangle free slimline injection molded boots.Features:
• Produced by an ISO9001 and ISO14001
certifi ed manufacturer
• 100% tested and channel certified by 3P, UL and ETL
Colour: Blue
Length: 0.3m
Frequency: 550MHz -
4MM CONDUIT WIRE – GREEN/YELLOW
Single core conduit wire with 0.6/1KV V-90 insulation.
PVC sheathed complies with AS/NZS 5000.2 standards which was manufactured in accordance with PVC best practice guidelines.
It is suitable for fixed wiring installation for power circuits in domestic, commercial and industrial situations.Conductor material: Copper
Outer sheath: PVC
Insulation: PVC
Cores x Area (mm2): 1 x 4.0
Rated Voltage Uo/U: 0.6/1 KV
Max. conductor temperature in service: 75°C
Nom Diameter: 4.7 mm
Color: Green/yellow -
1 X 1.5mm High Performance Flexible Appliance / Marine Wire – Green/Yellow
Applications:
Power
Flexible thermal insulated wire suitable for switchboard wiring, motors and transformers.
Marine
Tinned copper conductors for boat wiring and other marine applications.
Audio
Amplifiers and audio equipment where oxygen-free copper wire is required.It features:
Tinned fine stranded copper conductor
UV stabilised
Flame retardant
Oil and chemical resistant (refer to Chemical Rating Chart)
No. of Cores x Size (mm): 1 x 1.5
Approx Stranding (No. of wires x mm): 30/0.25
Approx. Overall Diameter (mm): 3.4 -
PRYSMIAN 1MM 2C+E TPS FLAT
Two core plus earth flat cable with 450/750V V-90 insulation.
PVC sheathed complies with AS/NZS 5000.2 standards which was manufactured in accordance with PVC best practice guidelines.
Includes 90°C copper conductors.
It is suitable for fixed wiring installation for power circuits in domestic, commercial and industrial situations.Conductor material: Copper
Outer sheath: PVC
Insulation: PVC
Cores x Area (mm2): 2 x 1.0 + 1.0 E
Rated Voltage Uo/U: 450/750 V
Max. conductor temperature in service: 75°C
Earth selection cross: 1.0 mm²
Nom Diameter: 4.0 x 8.6 mmSubject to stock available.
-
95MM 1 CORE ALUMINIUM CABLE
This cable may be buried directly in the ground, or may be installed in ducts buried in the ground. Used for Indoors, cable ducts, outdoors and buried in the ground, for power stations, industry and switchgear as well as for urban supply networks, if mechanical damage is unlikely. XLPE insulation material has better mechanical, electrical, chemical and durability characteristics than PVC.
Conformance: AS/NZS 5000.1
Core colour: Natural
Number of Core: 1
Conductor: Al 1350 AS/NZS 2848.1
Conductor Size: 95mm
Insulation: XLPE X-90 AS/NZS 3808
Sheath: PVC 5V-90 Black AS/NZS 3808
Test voltage: 3.5kV/5min
Temperature range: -40 to 90C -
DYNMAICS ALARM CABLE 100M, 4C, 022MM, BARE COPPER
Dynamix C-S4C100-22 100M 4C 0.22mm Bare Copper Security Cable. Supplied on Plastic Reel
0.22MM
4 CORE
100 MTR / DRUM -
16MM SINGLE CORE XLPE CABLE
For mains, sub-mains and sub circuits unenclosed, enclosed in conduit, buried direct or in underground ducts for buildings and industrial plants where not subject to mechanical stress. Suitable where space is at a premium and/or where conditions of overload may occur.
Conductor: Plain annealed copper
Insulation: XLPE X-90
Sheath: PVC 5V-90
Voltage: 0.6/1KV
Standards: AS/NZS 1125, AS/NZS3808 and AS/NZS 5000.1
Voltage: 90°C -
2 x 4mm2 Solar Cable DC 1.5kV EN5061/IEC62930 100METER
2 X 52/.3 (4mmsq). Tinned Copper Wire, XLPO Insulated & XLPO.
Sheathed in Twin format.
Certified to EN50618/IEC62930. TUV
1.5kV dc -40c to 120c.Construction
Conductor: 52 strands of 0.3mm nom. TINNED Annealed Copper to AS/NZS 1125 Class 5.
Max. D.C. resistance at 20C: 5.09 ohms / km.Insulation: XLPO.
Nominal Wall Thickness: 0.60 mm.Core Colours:
1. Black
2. RedSheath: Black with red polarity stripe on side of red core.
XLPO Single Double Insulated (TWIN) configuration.
Nominal Dimensions: 5.5 x 11.4 mm
Nominal Wall Thickness: 0.6 mmIdentification: Printed on sheath in contrasting colour ¨C HFXT2520- XLPO insulated TUV 2pfG 1169 2 x 4MM2 0.9/1.5kV DC UV STABLE DC USE ONLY ¨C DO NOT DISCONNECT UNDER LOAD ¨C 001M >I<
-
Weatherproof European Junction Box 85×85
Tanzini surface-mounted, waterproof sealed plastic electrical enclosure/ Junction box with anti-corrosion performance, which can protect your instruments even under the adverse environment.
Dimention: 85WX85HX50D mm
IP66
5way terminals included -
JUNCTION BOX 77*77*54MM IP55
All products comply with AS/NZS standard.
Dimension: 77x77x54 mm
IP55
For use indoors and outdoors -
COPPER LINKS 16MM 63A-2 HOLE
Good quality copper linke which comply with AS/NZS standards.
Dimention: 45x18mm -
TANZINI SURFACE MOUNT 8 WAY SWITCH BOARDIP65
Tanzini switchboards comply with AS/NZS standard and waterproof.
This surface mount switchboard is applicable with a range of our circuit breakers and including RCD bars , earth bar , neutral bar and busbar.Plenty of different sizes distribution board are available.
-
SDocs:V0421-SWBX
Mounting method: Surface
Dimention: 210x210x100mm
IP rating: IP65
Main earth bar: 1
Main neutral bar: 1
Bus bar: 1 -
-
HEM DOUBLE POWERPOINT VERTICAL – 10A, WHITE
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
-
SDocs:V0820-WGPO2-DPX
Plate dimensions: 74W x 118H x 10D (mm)
Colour: White
Rate: 10A
Input voltage: AC 230V -
-
HEM SURFACE SINGLE SOCKET WITH MOUNT PLATE – 10A, WHITE
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Colour: White
Rate: 10A
Input voltage: AC 230V -
RJ45 Adaptor for HEM plate
RJ45 Adaptor for most NZ CAT5E & CAT6 keystone to suit HEM switchgear plate.
Material: ABS plastic -
PDL Keystone Format Data Jack Clip Module – White
PDL 600 Series were designed and engineered locally in Christchurch, taking into account the specific needs of New Zealand and Australian homes and building.
The plastics used in 600 Series are recycleable so once no longer required, need not place a burden on our landfills.Note: we do have full range of PDL 600 series, please ring us if you need something else.
Colour: White
Vertical Installation
Length: 23mm
Depth: 15.3mm
Material: Polycarbonate -
HEM 1 GANG PLATE WITH ALUMINIIUM COVER
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Plate dimensions: 74W x 118H x 10D (mm)
Gang No.: 1 -
HEM 3 GANG PLATE WITH ALUMINIIUM COVER
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Plate dimensions: 74W x 118H x 10D (mm)
Gang No.: 3
Colour: White -
Aluminium Metal Cover for HEM/HQE OneGang Switch
Aluminium cover applicable for HEM and HQE one gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
Aluminium Metal Cover for HEM/HQE TwoGang Switch
Aluminium cover applicable for HEM and HQE Two gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
HEM Single Switch IP56 Weatherproof – 16A
IP56 rating provides high weather resistance for water and dust making this product suitable for outdoors.
Power: 16A
Input Voltage : AC 250VSize:85x85x62mm -
HEM BLACK Single Switch IP56 16A
IP56 rating provides high weather resistance for water and dust making this product suitable for outdoors.
Power: 16A
Input Voltage : AC 250VSize:85x85x62mm
-
HEM Single Socket IP53 Weatherproof – 10A
IP53 rating provides weather resistance making this product suitable for outdoors.
Power: 10A
Input Voltage: AC 250V -
HEM Double Socket IP53 Weatherproof – 10A
IP53 rating provides weather resistance making this product suitable for outdoors.
Power: 10A
Input Voltage: AC 250V -
TANZINI TCG Series RCD 2Pole 40A
Rated Current: 40A
Rated Voltage: 230Vac 50Hz
Pole: 1P+N
In=30mA
Ic=Inc=6kAWidth:36mm
Height: 84mm
Depth: 69mmComply with AS/NZS 61008
-
TANZINI TCG Series RCD 2Pole 63A
Rated Current: 63A
Rated Voltage: 230Vac 50Hz
Pole: 1P+N
In=30mA
Ic=Inc=6kAWidth:36mm
Height: 84mm
Depth: 69mmComply with AS/NZS 61008
-
TANZINI MCB 1Pole 6A Type-C TCG Series
Rated Current: 6A
Rated Voltage: 230/400Vac 50Hz
Pole: 1P
Type C
Ic=Inc=6kAComply with AS/NZS 60898
-
TANZINI MCB 1Pole 10A Type-C TCG Series
Rated Current: 10A
Rated Voltage: 230/400Vac 50Hz
Pole: 1P
Type C
Ic=Inc=6kAComply with AS/NZS 60898
-
TANZINI TCG Series Main Isolater 1Pole 100A
Rated Current: 100A
Rated Voltage: 230/400Vac 50Hz
Pole: 1
Degree of protection: IP20
Width: 18mm
Height: 84mm
Depth: 77mm -
LEGRAND ISOLATING SWITCH 1P 63A
Isolating switches DX3-IS – from 16 A to 125 A
Double break contactsfor more product information, please click https://www.legrand.co.nz
Product characteristics
Isolating switches – Grey handle
AC 22 A
Can be equipped with 1 DX3 signalling auxiliary
1P – 250 V~
Compatible with prong-type and fork type supply busbars
Nominal rating In : 63 A
Number of modules : 1 -
Digital Check Meter- 40A 36mm-width Single phase
Single phase 36mm-width Digital power check meter.
Reliable method for checking how much power is being consumed.
Complies with IEC62053-21 standard AND IP51 rated for protection against penetration of dust and water.Width: 36mm
Input voltage: 220-250AC
Rated current: 40A
Dinrail mounting -
SHENLER DOUBLE POLE RELAY BASE WITH LEVER
Plastic marker clip
-DIN rail mounting -
CHINT AC Contactor 2 x N/O 2Pole 20A
Din Mount 2P 20 amp Contactor 240V 2 x N/O
-
CHINT AC Contactor 4 x N/O 4Pole 25A
Din Mount 4P 25 amp Contactor 240V 4 x N/O
-
Dinrail 24/7 Timer Switch – 1 pole 16A
Programmable analogue timer with the option to customise the settings.
Easy to control once installed with a 24 hour cycle and a low power consumption.
High current rating making this timer suitable for commercial use with a 15 minute minimum interval and 3 day reserve if power cuts off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
Dinrail 24/7 Timer Switch – 16A 36mm-width
Weekly programmable digital timer with dinrail installation and advanced one week prior pre-setting.
Easy to control once installed with a 24 hour cycle and LCD display.
High current rating making this timer suitable for commercial use with a lithium battery reserve of 3 years when power is cut off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
EMERGENCY LIGHTING CONTROLLER 230V
ENYA series
Timer for automatic test of emergency lights
Integrated test key
1 change over contact
Width 17.5mm
Installation designTechnical dataWs Single shot leading edge with control contact
Time ranges
Time range reversible between
10min, 30min, 60min, 90min, 2h and 3h
IP rating IP20
Tightening torque: max. 1Nm
Terminal capacity:
1 x 0.5 to 2.5mm² with/without multicore cable end
1 x 4mm² without multicore cable end
2 x 0.5 to 1.5mm² with/without multicore cable end
2 x 2.5mm² flexible without multicore cable end
5. Input circuit
Supply voltage: 230V AC
Terminals: L-N
Tolerance: -15% to +10%
Rated frequency: 48 to 63Hz
Rated consumption: 2VA (1.0W)
Duty cycle: 100%
Reset time: 500ms
Ripple and noise at DC: –
Drop out voltage: >30% of supply voltage
Overvoltage category: III (in accordance with IEC 60664-1)
Rated surge voltage: 4kV
