best selling
-
HEM Photocell/ Daylight switch 6A
This light control switch is an auto daylight light sensor switch allowing adjustment of brightness.
Electronic devices are controlled to switch on or off through illumination which turns the light on at night and off in the daytime.Input Voltage: AC 220V
Max Load Current: 6A
Frequency: 50-60Hz
Ambient-light:<5-100lux -
16MM SINGLE CORE XLPE CABLE
For mains, sub-mains and sub circuits unenclosed, enclosed in conduit, buried direct or in underground ducts for buildings and industrial plants where not subject to mechanical stress. Suitable where space is at a premium and/or where conditions of overload may occur.
Conductor: Plain annealed copper
Insulation: XLPE X-90
Sheath: PVC 5V-90
Voltage: 0.6/1KV
Standards: AS/NZS 1125, AS/NZS3808 and AS/NZS 5000.1
Voltage: 90°C -
95MM 1 CORE ALUMINIUM CABLE
This cable may be buried directly in the ground, or may be installed in ducts buried in the ground. Used for Indoors, cable ducts, outdoors and buried in the ground, for power stations, industry and switchgear as well as for urban supply networks, if mechanical damage is unlikely. XLPE insulation material has better mechanical, electrical, chemical and durability characteristics than PVC.
Conformance: AS/NZS 5000.1
Core colour: Natural
Number of Core: 1
Conductor: Al 1350 AS/NZS 2848.1
Conductor Size: 95mm
Insulation: XLPE X-90 AS/NZS 3808
Sheath: PVC 5V-90 Black AS/NZS 3808
Test voltage: 3.5kV/5min
Temperature range: -40 to 90C -
LEGRAND ISOLATING SWITCH 1P 63A
Isolating switches DX3-IS – from 16 A to 125 A
Double break contactsfor more product information, please click https://www.legrand.co.nz
Product characteristics
Isolating switches – Grey handle
AC 22 A
Can be equipped with 1 DX3 signalling auxiliary
1P – 250 V~
Compatible with prong-type and fork type supply busbars
Nominal rating In : 63 A
Number of modules : 1 -
TANZINI Flush Mount 6 Way Distribution Board
Tanzini switchboards comply with AS/NZS standard.
This surface mount switchboard is applicable with a range of our circuit breakers and including RCD bars , earth bar , neutral bar and busbar.Plenty of different sizes distribution board are available.
Mounting method: Flush
Overall: 172W x 221H x 90D
Main earth bar: 1
Main neutral bar: 1
Bus bar: 1
Indoor use onlyF -
Cover for RM17ST Step Light White Square-Square
COVER ONLY for RM17ST Step Light.
-
REEM 20W 3/4/6K CCT BATTEN LED 600MM IP20
REEM LED Batten ART series coming with Tridonic Driver is available in 20,40 and 50 Watt. Architectural fitting suitable for many differenct applications, for example, garages, schools, commercial environments and industrial applications. The light colour is able to be switched among Warm White, Neutral White and Cool White by using build-in switch.
Voltage: 220-240Vac 50/60Hz
Power: 20watt
IP: IP20
IK: IK06
CCT: 3/4/6K Changeable
Lumen: 2200lm
PF: >0.9
CRI: >80
Class I
Comply with AS/NZS standards.
3 YEAR WARRANTY -
HEM Double Socket IP53 Weatherproof – 10A
IP53 rating provides weather resistance making this product suitable for outdoors.
Power: 10A
Input Voltage: AC 250V -
SEDEX 70Cut 7Watt Downlight LED 3CCT
SEDEX combines sleek, modern design with advanced features, making it perfect for any living or working environment.
Crafted from high grade IP44 weather resistant material, SEDEX guarantees longevity and optimal performance for years to come.
SEDEX provides exceptional energy efficiency with up to 80% energy savings which makes it a perfect fit for your home.
Not only does our SEDEX light provide impressive lighting and durability, but it also comes with warranty ensuring peace of mind and reliability.Discover the Brilliance of SEDEX and bring impressive illumination to any space!
Power : 7watt
Voltage : 220-240AC, 50Hz
CCT : 3000K, 4000K, 6000K
Cut : 70-75mm
Overall : 96mm
Lumens: 750lm
IP rating : IP44
CRI: >80
Dimmable
IC-F
2 YEAR WARRANTY -
2 x 4mm2 Solar Cable DC 1.5kV EN5061/IEC62930 100METER
2 X 52/.3 (4mmsq). Tinned Copper Wire, XLPO Insulated & XLPO.
Sheathed in Twin format.
Certified to EN50618/IEC62930. TUV
1.5kV dc -40c to 120c.Construction
Conductor: 52 strands of 0.3mm nom. TINNED Annealed Copper to AS/NZS 1125 Class 5.
Max. D.C. resistance at 20C: 5.09 ohms / km.Insulation: XLPO.
Nominal Wall Thickness: 0.60 mm.Core Colours:
1. Black
2. RedSheath: Black with red polarity stripe on side of red core.
XLPO Single Double Insulated (TWIN) configuration.
Nominal Dimensions: 5.5 x 11.4 mm
Nominal Wall Thickness: 0.6 mmIdentification: Printed on sheath in contrasting colour ¨C HFXT2520- XLPO insulated TUV 2pfG 1169 2 x 4MM2 0.9/1.5kV DC UV STABLE DC USE ONLY ¨C DO NOT DISCONNECT UNDER LOAD ¨C 001M >I<
-
BulkHead LED10W IP65 CCT 3/4/6.5K
Voltage: 220-240Vac 50/60Hz
Power: 10Watt
Lumen: 1000lm
IP: IP65
IK: IK08
CCT:3000/4000/65000K
Beam Angle: 120 degree
Non-dimmableWhite colour trim is available.
-
HEM 3 GANG PLATE WITH ALUMINIIUM COVER
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Plate dimensions: 74W x 118H x 10D (mm)
Gang No.: 3
Colour: White -
TANZINI Flush Mount 4 Way Distribution Board
Tanzini switchboards comply with AS/NZS standard.
This surface mount switchboard is applicable with a range of our circuit breakers and including RCD bars , earth bar , neutral bar and busbar.Plenty of different sizes distribution board are available.
Mounting method: Flush
Overall Dimention: 136x221x90mm
Main earth bar: 1
Main neutral bar: 1
Bus bar: 1
Indoor use only -
![3 Pin Plug to Bare End [1M]](https://mew.co.nz/wp-content/uploads/2025/06/eyJidWNrZXQiOiJ3ZWItbmluamEtaW1hZ2VzIiwia2V5IjoidmVzdGFcL2ltYWdlc1wvcHJvZGltZ1wvMjY5MV8xLmpwZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6NDgwLCJoZWlnaHQiOjQ4MCwiZml0IjoiaW5zaWRlIiwid2l0aG91dEVubGFyZ2VtZW50Ijp0-300x300.webp)
3 Pin Plug to Bare End [1M]
High quality SAA Approved 3 pin plug to bare end, 3 core 1mm cable, 10A rated. Ideal for engineers,technicians and DIY use.
Cable Size: 1mm
Color: Black
Current rate: 10A
Length: 1M -
Weatherproof European Junction Box 85×85
Tanzini surface-mounted, waterproof sealed plastic electrical enclosure/ Junction box with anti-corrosion performance, which can protect your instruments even under the adverse environment.
Dimention: 85WX85HX50D mm
IP66
5way terminals included -
Reem Budget 12W 850lm, IP20, 6K
REEM Budget series Ceiling / Wall LED circular lamp.
Ideal for Bathroom, Bedroom, Dining, Kitchen, Living Room.
Commercial for cloak rooms, kitchens, hallways, service areas etc.Voltage: 230V 50/60Hz
Colour: 6000K
Dimension: 250*35mm
Lumen: 850lm
IP20
Power: 12W -
SURFACE MOUNT FRAME FOR PANEL LIGHT 600*1200*50
HIGH QUALITY SURFACE MOUNT FRME FOR PANEL LIGHTS
SUITS 600*1200mm PANEL LIGHTS. -
REEM PAR-38 Sensor Black Double Spotlight – No bulb
These outdoor spotlights mounted to wall or ceiling create a safe and secure home atmosphere while creating a stylish look.
The spotlight detects human motion including turning off when a person leaves to provide energy efficiency . An adjustable head with a 180 ° detection angle allowing easy rotation and flexibility to cover outdoor areas that need lighting.
IP44 rating provides environmental protection from water and dust day and night.Power Source: AC220-240V 50/60HZ
Detection Angle: 180°
Detection Range: 12m
Time on Adjustment: 5 secs – 8 min
Fitting Colour: Black
Ambient light: 2-1000Lux
Resistive load: 300W (max)
working temperature: -20 °c to +40 °c -
1 X 1.5mm High Performance Flexible Appliance / Marine Wire – Green/Yellow
Applications:
Power
Flexible thermal insulated wire suitable for switchboard wiring, motors and transformers.
Marine
Tinned copper conductors for boat wiring and other marine applications.
Audio
Amplifiers and audio equipment where oxygen-free copper wire is required.It features:
Tinned fine stranded copper conductor
UV stabilised
Flame retardant
Oil and chemical resistant (refer to Chemical Rating Chart)
No. of Cores x Size (mm): 1 x 1.5
Approx Stranding (No. of wires x mm): 30/0.25
Approx. Overall Diameter (mm): 3.4
-
HEM DOUBLE POWERPOINT VERTICAL – 10A, WHITE
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
-
SDocs:V0820-WGPO2-DPX
Plate dimensions: 74W x 118H x 10D (mm)
Colour: White
Rate: 10A
Input voltage: AC 230V -
-
HEM SURFACE SINGLE SOCKET WITH MOUNT PLATE – 10A, WHITE
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Colour: White
Rate: 10A
Input voltage: AC 230V -
RJ45 Adaptor for HEM plate
RJ45 Adaptor for most NZ CAT5E & CAT6 keystone to suit HEM switchgear plate.
Material: ABS plastic -
PDL Keystone Format Data Jack Clip Module – White
PDL 600 Series were designed and engineered locally in Christchurch, taking into account the specific needs of New Zealand and Australian homes and building.
The plastics used in 600 Series are recycleable so once no longer required, need not place a burden on our landfills.Note: we do have full range of PDL 600 series, please ring us if you need something else.
Colour: White
Vertical Installation
Length: 23mm
Depth: 15.3mm
Material: Polycarbonate -
HEM 1 GANG PLATE WITH ALUMINIIUM COVER
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Plate dimensions: 74W x 118H x 10D (mm)
Gang No.: 1 -
HEM 3 GANG PLATE WITH ALUMINIIUM COVER
HEM switchgears has nice design with UV stabilisation and is complete with a high quality plastic cover plate. With a low profile and premium high gloss surface finish, the HEM range makes the site with surface beauty. Australian and New Zealand standards approved. Ideal for the home handyman or professional trade people.
Plate dimensions: 74W x 118H x 10D (mm)
Gang No.: 3
Colour: White -
Aluminium Metal Cover for HEM/HQE OneGang Switch
Aluminium cover applicable for HEM and HQE one gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
Aluminium Metal Cover for HEM/HQE TwoGang Switch
Aluminium cover applicable for HEM and HQE Two gang switch.
-
SDocs:V1019-WS
Size: 74W x 118H (mm)
Material: Aluminium -
-
HEM Single Switch IP56 Weatherproof – 16A
IP56 rating provides high weather resistance for water and dust making this product suitable for outdoors.
Power: 16A
Input Voltage : AC 250VSize:85x85x62mm -
HEM BLACK Single Switch IP56 16A
IP56 rating provides high weather resistance for water and dust making this product suitable for outdoors.
Power: 16A
Input Voltage : AC 250VSize:85x85x62mm
-
HEM Single Socket IP53 Weatherproof – 10A
IP53 rating provides weather resistance making this product suitable for outdoors.
Power: 10A
Input Voltage: AC 250V -
HEM Double Socket IP53 Weatherproof – 10A
IP53 rating provides weather resistance making this product suitable for outdoors.
Power: 10A
Input Voltage: AC 250V -
TANZINI TCG Series RCD 2Pole 40A
Rated Current: 40A
Rated Voltage: 230Vac 50Hz
Pole: 1P+N
In=30mA
Ic=Inc=6kAWidth:36mm
Height: 84mm
Depth: 69mmComply with AS/NZS 61008
-
TANZINI TCG Series RCD 2Pole 63A
Rated Current: 63A
Rated Voltage: 230Vac 50Hz
Pole: 1P+N
In=30mA
Ic=Inc=6kAWidth:36mm
Height: 84mm
Depth: 69mmComply with AS/NZS 61008
-
TANZINI MCB 1Pole 6A Type-C TCG Series
Rated Current: 6A
Rated Voltage: 230/400Vac 50Hz
Pole: 1P
Type C
Ic=Inc=6kAComply with AS/NZS 60898
-
TANZINI MCB 1Pole 10A Type-C TCG Series
Rated Current: 10A
Rated Voltage: 230/400Vac 50Hz
Pole: 1P
Type C
Ic=Inc=6kAComply with AS/NZS 60898
-
TANZINI TCG Series Main Isolater 1Pole 100A
Rated Current: 100A
Rated Voltage: 230/400Vac 50Hz
Pole: 1
Degree of protection: IP20
Width: 18mm
Height: 84mm
Depth: 77mm -
LEGRAND ISOLATING SWITCH 1P 63A
Isolating switches DX3-IS – from 16 A to 125 A
Double break contactsfor more product information, please click https://www.legrand.co.nz
Product characteristics
Isolating switches – Grey handle
AC 22 A
Can be equipped with 1 DX3 signalling auxiliary
1P – 250 V~
Compatible with prong-type and fork type supply busbars
Nominal rating In : 63 A
Number of modules : 1 -
Digital Check Meter- 40A 36mm-width Single phase
Single phase 36mm-width Digital power check meter.
Reliable method for checking how much power is being consumed.
Complies with IEC62053-21 standard AND IP51 rated for protection against penetration of dust and water.Width: 36mm
Input voltage: 220-250AC
Rated current: 40A
Dinrail mounting -
SHENLER DOUBLE POLE RELAY BASE WITH LEVER
Plastic marker clip
-DIN rail mounting -
CHINT AC Contactor 2 x N/O 2Pole 20A
Din Mount 2P 20 amp Contactor 240V 2 x N/O
-
CHINT AC Contactor 4 x N/O 4Pole 25A
Din Mount 4P 25 amp Contactor 240V 4 x N/O
-
Dinrail 24/7 Timer Switch – 1 pole 16A
Programmable analogue timer with the option to customise the settings.
Easy to control once installed with a 24 hour cycle and a low power consumption.
High current rating making this timer suitable for commercial use with a 15 minute minimum interval and 3 day reserve if power cuts off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
Dinrail 24/7 Timer Switch – 16A 36mm-width
Weekly programmable digital timer with dinrail installation and advanced one week prior pre-setting.
Easy to control once installed with a 24 hour cycle and LCD display.
High current rating making this timer suitable for commercial use with a lithium battery reserve of 3 years when power is cut off.Rated voltage: 240VAC
Frequency: 50/60Hz
Power consumption: 1W
Cycle: 24hours -
EMERGENCY LIGHTING CONTROLLER 230V
ENYA series
Timer for automatic test of emergency lights
Integrated test key
1 change over contact
Width 17.5mm
Installation designTechnical dataWs Single shot leading edge with control contact
Time ranges
Time range reversible between
10min, 30min, 60min, 90min, 2h and 3h
IP rating IP20
Tightening torque: max. 1Nm
Terminal capacity:
1 x 0.5 to 2.5mm² with/without multicore cable end
1 x 4mm² without multicore cable end
2 x 0.5 to 1.5mm² with/without multicore cable end
2 x 2.5mm² flexible without multicore cable end
5. Input circuit
Supply voltage: 230V AC
Terminals: L-N
Tolerance: -15% to +10%
Rated frequency: 48 to 63Hz
Rated consumption: 2VA (1.0W)
Duty cycle: 100%
Reset time: 500ms
Ripple and noise at DC: –
Drop out voltage: >30% of supply voltage
Overvoltage category: III (in accordance with IEC 60664-1)
Rated surge voltage: 4kV
